Parts
Home ] Up ] Links ] About me... ] Contact ] Mailing lists ]

 

Major Parts

Receiver Transmitters

RT-66/GRC Receiver Transmitter 20-28 MHz

Dimensions: 229 x 287 x 330, 15,90 kg (42 lbs)
Receiver Transmitter, 20-28 mHz, continuous tuning, 80 channels or two presets, FM (F3E), power selectable Po=2 / 15 Watts, 27 tubes
Channel spacing 100 KHz, bandwidth = 60-80 KHz
Uses one of the following Power Supplies, connected through CX-1211/U Special Cable Assembly: PP-112/GRC (24 Volt), PP-109/GRC (12 Volt)
    Spare Tubes: 1A3 (2); 1AE4 (2); 1L4 (2); 1R5 (4); 1S5 (1); 1U4 (6); 2E24 (3); 3A4 (1); 3A5 (5); 3B4(2); 3Q4 (6); 6AK5 (2)

    Technical Manual: TM-11-289

Part of GRC-3, GRC-4, VRC-8, VRC-13, VRC-16, VRQ-1.

RT-67/GRC Receiver Transmitter 27-39 MHz

Dimensions: 229 x 287 x 330, 15,90 kg (42 lbs)
Receiver Transmitter, 27-39 mHz, continuous tuning, 120 channels or two presets, FM (F3E), power selectable Po= 2 / 15 Watts, 27 tubes
Channel spacing 100 KHz, bandwidth = 60-80 KHz
Uses one of the following Power Supplies, connected through CX-1211/U Special Cable Assembly: PP-112/GRC (24 Volt), PP-109/GRC (12 Volt)
    Spare Tubes: 1A3 (2); 1AE4 (2); 1L4 (2); 1R5 (4); 1S5 (1); 1U4 (6); 2E24 (3); 3A4 (1); 3A5 (5); 3B4(2); 3Q4 (6); 6AK5 (2)

    Technical Manual: TM-11-289

Part of GRC-5, GRC-6, VRC-9, VRC-14, VRC-17, VRQ-2.

RT-68/GRC Receiver Transmitter 38-55 MHz

Dimensions: 229 x 287 x 330, 15,90 kg (42 lbs)
Receiver Transmitter, 38-55 mHz, continuous tuning, 170 channels or two presets, FM (F3E), power selectable Po= 2 / 15 Watts, 27 tubes
Channel spacing 100 KHz, bandwidth = 60-80 KHz
Uses one of the following Power Supplies, connected through CX-1211/U Special Cable Assembly: PP-112/GRC (24 Volt), PP-109/GRC (12 Volt)
    Spare Tubes: 1A3 (2); 1AE4 (2); 1L4 (2); 1R5 (4); 1S5 (1); 1U4 (6); 2E24 (3); 3A4 (1); 3A5 (5); 3B4(2); 3Q4 (6); 6AK5 (2)

    Technical Manual: TM-11-289

Part of GRC-7, GRC-8, VRC-10, VRC-15, VRC-18, VRQ-3.

RT-70/GRC Receiver Transmitter 47-58 mHz

Dimensions: (12 7/8 x 7 1/4  x 5 1/4, 16 3/4 lbs)
Receiver Transmitter, 47-58 mHz, continuous tuning or two presets, FM (F3E), power selectable Po=0.5 Watts, range1 mile
Channel spacing 100 KHz, bandwidth = 60-80 KHz
Uses 90 Volt dc and 6 Volt dc, Current drain
    Spare Tubes: 3B4 (1); 3Q4 (4); 3A5 (3); 1L4 (3); 1U4 (6); 1R5 (1); 1S5 (1); 1AE4(1)
    Spare Parts: GH-1992-2 Lamp Incandescent (3)
    No tools supplied

    Technical Manual: TM-11-290

Korean War
RT-70A is also mentioned...

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, PRC-16, VRC-7.


Receivers

R-108/GRC Radio Receiver, 20-27.9 mHz

Dimensions: (9 x 7 1/4 x 12 13/16, 25 lbs incl. Internal Power Supply)
Radio Receiver, 20-28 mHz, continuous tuning or three presets, FM single conversion, super heterodyne, 15 tubes
Channel spacing 100 KHz
Uses 135 Volt dc and 6 Volt dc, Current drain 4 Amp.
Contains one of the following Internal Power Supplies: PP-281/GRC (24 Volt), PP-282/GRC (12 Volt), PP-448/GRC (6 Volt).
    Spare Tubes: Unknown
    Spare Parts: Fuse AGU 4 Amp. (1)
    Tools and Materials: Circuit Label, folded in a compartment on the chassis; Instruction Books (2)

    Technical Manual: TM-11-898

Part of GRC-3, VRC-16.

R-109/GRC Radio Receiver, 27-39 mHz

Dimensions: (9 x 7 1/4 x 12 13/16, 25 lbs incl. Internal Power Supply)
Radio Receiver, 27-39 mHz, continuous tuning or three presets, FM single conversion, super heterodyne, 15 tubes
Channel spacing 100 KHz
Uses 135 Volt dc and 6 Volt dc, Current drain 4 Amp.
Contains one of the following Internal Power Supplies: PP-281/GRC (24 Volt), PP-282/GRC (12 Volt), PP-448/GRC (6 Volt).
    Spare Tubes: Unknown
    Spare Parts: Fuse AGU 4 Amp. (1)
    Tools and Materials: Circuit Label, folded in a compartment on the chassis; Instruction Books (2)

    Technical Manual: TM-11-898

Part of GRC-5, VRC-17.

R-110/GRC  Radio Receiver, 38-55 mHz

Dimensions: (9 x 7 1/4 x 12 13/16, 25 lbs incl. Internal Power Supply)
Radio Receiver, 38-55 mHz, continuous tuning or three presets, FM single conversion, super heterodyne, 15 tubes
Channel spacing 100 KHz
Uses 135 Volt dc and 6 Volt dc, Current drain 4 Amp.
Contains one of the following Internal Power Supplies: PP-281/GRC (24 Volt), PP-282/GRC (12 Volt), PP-448/GRC (6 Volt).
    Spare Tubes: Unknown
    Spare Parts: Fuse AGU 4 Amp. (1)
    Tools and Materials: Circuit Label, folded in a compartment on the chassis; Instruction Books (2)

    Technical Manual: TM-11-898

Part of GRC-7, VRC-18.

Amplifiers

AM-65/GRC AF Amplifier

Dimensions: 108 x 201 x 330. Weight: 7,29 kg.
Contains one of the following Internal Power Supplies: PP-281/GRC (24 Volt), PP-282/GRC (12 Volt), PP-448/GRC (6 Volt).
    Spare Tubes: 6AK6 (2); 12AU7 (3); 0B2 (2).
    Spare Parts: Fuses AGU 4 Amp. (1); AGU 10 Amp. (1); Ballast Tube R-32 (1); Thermal Relay K-1 (1).

    Technical Manual: TM-11-5039

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, PRC-16, UIC-1, VRC-7, VRC-13, VRC-14, VRC-15.

Power Supplies

PP-112/GRC Power Supply (24 Volt)

Dimensions: 229 x 184,5 x 330. Weight:15,90 kg.
    Spare Tubes: 1007 (1); 0B2 (2); 0A2 (2).
    Spare Parts: Fuse AGU 5 Amp. (3); Fuse AGU 3 Amp. (1); Thermal Relay K-1,  K-2 (1); Ballast Tube R-24, 25, 31, 37, 38, 40 (3); Vibrator 24 Volt E-1, 2, 3 (3).

    Technical Manual: TM-11-5036

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.

PP-109/GRC Power Supply (12 Volt)

Dimensions: 229 x 184,5 x 330. Weight: 15,90 kg.
    Spare Tubes: 1007 (1); 0B2 (2); 0A2 (2).
    Spare Parts: Fuse AGU 5 Amp. (2); Fuse AGU 10 Amp. (2); Thermal Relay K-1,  K-2 (1); Ballast Tube R-24, 25, 31, 37, 38, 40 (2); Vibrator 6 Volt E-1, 2, 3 (3).

    Technical Manual: TM-11-5036

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.

PP-282/GRC Internal Power Supply (24 Volt)

Dimensions: 112 x 76 x 155. Weight: 2,73 kg. (4 1/4 x 5 3/4 x 2 15/15, 5 pound 9 ounces)

Input 25.2 volts (20 to 32 volts), 1.23 amperes max.
Output 136 volts dc (105 to 185 volts), 0.118 amperes

    Spare Parts: Vibrator 24 Volt (2).

    Technical Manual: TM-11-5040

Part of R-108/GRC, R-109/GRC, R-110/GRC, AM-65/GRC.

PP-281/GRC Internal Power Supply (12 Volt)

Dimensions: 112 x 76 x 155, 2,73 kg.  (4 1/4 x 5 3/4 x 2 15/15, 5 pound 9 ounces)
Input 12.6 volts (10 to 16 volts), 2.25 amperes max.
Output 136 volts dc (105 to 185 volts), 0.118 amperes
    Spare Parts: Vibrator 12 Volt (2).

    Technical Manual: TM-11-5040

Part of R-108/GRC, R-109/GRC, R-110/GRC, AM-65/GRC.

PP-448/GRC Internal Power Supply (6 Volt)

Dimensions: 112 x 76 x 155, 2,73 kg.  (4 1/4 x 5 3/4 x 2 15/15, 5 pound 9 ounces)
Input 6.3 volts (5 to 8 volts), 4.1 amperes max.
Output 136 volts dc (105 to 185 volts), 0.118 amperes

I am not sure if this was used in any of the original American configurations, however, they have been used in European vehicles operating on 6 Volt.
    Spare Parts: Vibrator 6 Volt (2).

    Technical Manual: TM-11-5040

Part of R-108/GRC, R-109/GRC, R-110/GRC, AM-65/GRC.

Battery Cases

CY-590/GRC Battery Carrying Case

Batteries: (5) BA-403/U, (1) BA-419/U

Part of PRC-16, MX-898/GR


Mountings

MT-297/GR Mounting

Mounting for vehicular sets - containing the connectors for the various parts. Apart from being a mechanical fixture with it's own shock mounts, it supplies power to all parts mounted on it, interconnects those parts and allows the Interphone system to be hooked up. This could be considered the most versatile mounting within the Old Family.

There are four mounting positions on top - not all are used in some configurations. From left to right:
Auxiliary receiver, either R-108/GRC, R-109/GRC or R-110/GRC.
Receiver Transmitter, either RT-66/GRC, RT-67/GRC or RT-68/GRC.
Power Supply, either PP-112/GRC or PP-109/GRC.
Amplifier AM-65/GRC (in some configurations carrying Receiver Transmitter RT-70/GRC on top).

Running from the sides, there are seven short cables with connectors, to hook up the parts in use. From left to right:
W-1: Power In - Receiver R-108/GRC, R-109/GRC or R-110/GRC.
W-2: Receiver Control - Receiver R-108/GRC, R-109/GRC or R-110/GRC.
W-3: Receiver Transmitter Control - Receiver Transmitter RT-66/GRC, RT-67/GRC or RT-68/GRC.
W-5: Power In - Power Supply PP-112/GRC or PP-109/GRC.
W-4: Power In - Amplifier AM-65/GRC (also for Receiver Transmitter RT-70/GRC).
W-7: Intercom - Amplifier AM-65/GRC.
W-6: Receiver Transmitter Control - Receiver Transmitter RT-70/GRC (through Amplifier AM-65/GRC).
Unused cables must be screwed tight unto blind holding posts provided on the front to maintain water tightness.
Then, on the left side, a longer cable:
W8: Power Cable CO-212 ending in two eyelets

The mounting also has the capability to interconnect up to two series of daisy chained C-375/VRC Control Boxes for Interphone and Radio for individual crew members by means of cable WM-46/U to C-375/VRC Control Box. For more information, look up WM-46/U.
A slot underneath allows either a C-434/GRC Local Control Box or C-435/GRC Retransmission Box to be inserted and locked into place mechanically - there is a round connector provided, with a screw on lid to keep it closed when not in use.

Dimensions: 127 x 864 x 305 millimetres. Weight: 22,70 kilogram's.

Variant: MT-297 SKPa + MT-297 SPKb (found in Dutch manuals)

Add controls, pilot lamp and fuses

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-13, VRC-14, VRC-15.


MT-298/GR Mounting

Dimensions:

Power Cable CO-212.

Part of VRQ-1, VRQ-2, VRQ-3.


MT-299/GR Mounting

Dimensions:

Power Cable CO-212

Part of VRC-8, VRC-9, VRC-10.


MT-300/GR Mounting

Dimensions:

Power Cable CO-212.

Part of UIC-1, VRC-7.


MT-327/GR Mounting

Dimensions:

Power Cable CO-212.

Part of VRC-16, VRC-17, VRC-18.


MT-673/GR Mounting

Dimensions:

Part of PRC-16.


Control Boxes

C-375/VRC Control Box for Vehicular Use

Dimensions: 204 x 178 x 102. Weight: 1,59 kg.

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, UIC-1, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.


C-433/GRC Remote Control Box

Dimensions: 89 x 178 x 238,5. Weight: 2,27 kg.
Dutch: Stuurdoos op afstand Part of GRA-6.

C-434/GRC Local Control Box

Dimensions 89 x 210 x 267. Weight: 3,63 kg. Fits MT-297/GR
Part of GRA-6.

C-435/GRC Local Retransmission Control Box

Dimensions:

Directs retransmissions on sets so configured.

Fits MT-297/GR
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRQ-1, VRQ-2, VRQ-3.


Various

WM-46/U Special Purpose Cable

The Interphone System Cable, a heavy and specialized cable with ten leads of which five are shielded. This is the cable used to hook up the C-375/VRC Control Boxes to whatever mounting is used in the system. And, unlike later radios, where the cables come fitted with connectors and just can be hooked up, this one has to be soldered in.

It's over 1,3 kilogram's per meter, is not easy to bend and must be soldered by hand.

It's not the easiest of cables to find when fitting one of the Old Family Radio Sets - but it seems to have had other uses, so some years back I was able to order two fairly long rolls - with fitted connecters - from Fair Radio Sales. Searching the Internet also gave me two other designations that seem to lead to suppliers - have not tried them yet - using the nomenclature "MIL-C-2486C" and "MIL-C-1486".

Originally, a short length of WM-47/U would be packed with each individual set, as well as a first Control Box.

Fits: C-375/VRC, MT-297/GR, MT-298/GR, MT-299/GR, MT-300/GR, MT-327/GR, MT-673/GR.

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, UIC-1, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.


W-142 cable

A cable I've never seen yet, but it must be a rather simple single lead insulated wire. It's used to connect the Antenna Connector on the Auxiliary Receiver R-108/GRC, R-109/GRC, R-110/GRC  to the Antenna Post on Transmitter Receiver RT-66/GRC, RT-67/GRC, RT-68/GRC. When rebuilding a complete set, any old bit of wire will do in my opinion.

Part of GRC-3, GRC-5, GRC-7, VRC-16, VRC-17, VRC-18.


CX-1209/U Power Cable Assembly

Power cable between CY-590/GRC Battery Box and RT-70/GRC Receiver Transmitter.

Part of PRC-16, MX 898/GR.

CX-1210/U Power Cable Assembly

Power cable for battery use (Work out where and when - different for RT-66 and RT-70, also for G-8/GRC)

Part of MX 898/GR.

CX-1211/U Power Cable Assembly

Dimensions: 3,5 inch. Weight: 0,225 kg.

Connects between PP-112/GRC (24 Volt) or PP-109/GRC (12 Volt) and RT-66/GRC or  RT-67/GRC or RT-68/GRC.

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.


CX-1213/U Special Purpose Cable Assembly

Dimensions: ?? inch. Weight: ?? kg.

Connects between RT-70/GRC and AM-65/GRC.

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7.


CO-212 Power Cable

Dimensions:
Integral part of mounting to Vehicular Storage Battery

Part of MT-297/GR, MT-298/GR, MT-299/GR, MT-300/GR, MT-327/GR.


WD-1/TT Field Cable (Telephone)

Used with GRA-6

H-8 Carrying Belt

Carrying belt for C-433/GRC Remote Control Box.

Part of GRA-6


Antenna Bases

AB-15/GR Mast Base
Dimensions: 380
Vehicular use
Fits:
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.

Antenna Mountings

MT-652/GR Antenna Mounting

Dimensions:
Clips on Receiver Transmitter, with integral Antenna Cable

Fits RT-66, RT-67, RT-68, RT-70.
Part of PRC-16, MX-898/GR.


Mast Sections

MS-116-A  Mast Section

Dimensions: 1 metre. Weight: 0,273 kg.
Base - fits itself to lengthen antenna and MS-117-A
Fits Mast Bases AB-15/GR, MP-65-A-GY.
Fits Insulator IN-127-GY.
Part of GRC-3, GRC-4, GRC-5, GRC-6, VRC-8, VRC-9, VRC-13, VRC-14, VRC-16, VRC-17, VRQ-1, VRQ-2.

MS-117-A  Mast Section

Dimensions: 1000. Weight: 0,64 kg.
Middle - fits MS-116-A and MS-118-A.

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.


MS-118-A Mast Section

Dimensions: 1000. Weight: 0,225 kg.
Top - fits MS-117-A.

Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, MX 898/GR, PRC-16, VRC-7.


AB-22/GR Mast Section

Dimensions: 580.Weight: ?? kg.
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, MX 898/GR, PRC-16, VRC-7.

AB-23/GR Mast Section

Dimensions: 580.Weight: ?? kg.
Part of MX 898/GR.

AB-24/GR Mast Section

Dimensions: 580.Weight: 0,059 kg.
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, MX 898/GR, PRC-16, VRC-7, VRC-10, VRC-15, VRC-18, VRQ-3.

Antenna Cables

CG-530/U Antenna Cable

Dimensions: length 1270 mm. Weight 0,225 kg.
For frequencies above 29 MHz.
Used with UG-273/U, UG-306/U
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7, VRC-9, VRC-10, VRC-14, VRC-15, VRC-17, VRC-18, VRQ-2, VRQ-3.

CG-568/U HF antenna cable.

Dimensions: length 1270 mm. Weight 0,225 kg.
For frequencies under 29 mHz
Used with UG-273/U, UG-306/U

Part of GRC-3, GRC-4, VRC-7, VRC-8, VRC-13, VRC-16, VRQ-1.


Antenna Connectors

UG-273/U Adapter Antenna Straight

Weight: 0,154 kg.
Straight coaxial BNC adapter for use on Mast Base.
Used with AB-15/GR, CG-568/U , CG-530/U
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.

UG-306/U Adapter Antenna Angled

Dimensions: 11,75 x 25,4 x ??. Weight: 0,163 kg.
Angular (90 degrees) coaxial BNC adapter for use on Receiver Transmitter front.
Used with RT-66/GRC, RT-67/GRC, RT-68-GRC, RT-70/GRC
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.

Batteries

BA-30

Battery, 1.5 Volts (Military version of standard D-cell)
Fits: C-433/GRC, C-434/GRC.

BA-279/U

Battery, 1.5 Volts, 6 Volts, 67.5 Volts, 135 Volts
Eight-terminal receptacle
Tested with TS-183/U
Fits: PRC-8, PRC-8A, PRC-9, PRC-9A, PRC-10, PRC-10A.

BA-403/U

Battery, 1.5 Volts
Fits: CY-590/GRC.

BA-414/U

Battery, 45 Volts.
Fits: C-433/GRC.

BA-419/U

Battery, 90 Volts
Fits: CY-590/GRC.

Bags

CW-187/GR

Cotton duck Carrying Bag for Handset, Cables, Mast Sections, Generator Feet and TM

Part of MX 898/GR.



CW-188/GR

Cotton duck Carrying Bag for either Generator and Battery Box or Receiver Transmitter

Part of MX 898/GR.



CW-189/GR
Bag for GRA-6. Dimensions: 280 x 197 x 270.Weight: 0,453 kg.
Part of GRA-6.

CW-206/GR
Bag for manuals, spare parts and spare mast sections. Dimensions: 76 x 1016 x 127, Weight: 1,59 kg.
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.


CW-216/PR
Bag worn on combat belt holding Handset H-33/PT, Antenna AT-271/PRC and Antenna Spring Section AB-129/PR
Part of   PRC-8, PRC-8A, PRC-9, PRC-9A, PRC-10, PRC-10A,

Spare Part Boxes

CY-684/GR

Spare Parts Box. Metal box with felt lined interior - often this lining has become hardened and sticky with age.

It's contents can vary, according to the set it was used with. The spares actually were delivered with each apparatus - I've tried to mention those with the different units that came with spares. The manuals state that in some cases - most cases, in my opinion - CY-684/GR would be too small to hold all spares supplied. The manual for each set suggests what spares to actually keep in the Spare Parts Box - I will try to document that list for those sets that I actually have the manual for, so you can check whether your particular box is filled accordingly.

Dimensions:  Weight: 1,36 kg.
Part of GRC-3, GRC-4, GRC-5, GRC-6, GRC-7, GRC-8, VRC-7, VRC-8, VRC-9, VRC-10, VRC-13, VRC-14, VRC-15, VRC-16, VRC-17, VRC-18, VRQ-1, VRQ-2, VRQ-3.


Generators

G-8/GRC

Generator.

A hand driven generator.

Part of MX 898/GR


Last updated: 21-05-2005 19:54 +0200
Copyright 2001, 2002, 2003, 2004, 2005 A.J.M.O. Witkop. All Rights Reserved.